23rd
January
2011
Electrical and plumbing
Installed the bulkhead fittings on the firewall for the fuel feed and purge return lines — I think I will also install a doubler on the aft side of the firewall that picks up both fittings, as they’re a bit wobbly yet. Bent and test-fit the fuel line from pump to firewall, and fabricated a purge return line to run from the firewall back to the tee under the fuel selector. Installed the elbow fittings in the transducer manifold. Mounted the 4-channel lighting dimmer, and ran more wires.
Hours: 6.1 | Posted in Electrical, Plumbing | Comments Off
