28th
April
2012
Shiny White Cowling
Finished sanding the exterior of the bottom cowl, and sprayed the inside of both cowls with the white single-stage urethane. PPG Omni was what the local store had for “cheap,” so that’s what I used. Having only sprayed the primers before, I was a bit surprised at how thin the paint was. Also, how much aerosol it created–the shop looked foggy until I opened the doors to purge it out. Also very sticky, much more do than the primers are. In any event the white coat should be done, and all that’s left on the cowls is to spray the DPLF sealer, hopefully tomorrow.
Hours: 2.6 | Posted in Cowling & Baffles | Comments Off
