18th August 2009

Flat table

Hours: 1.5 | Posted in Ailerons

Built the flat table for aileron & flap assembly tonight…that sucker must weigh upwards of 100 pounds.  The top and bottom are half-sheets of 3/4″ MDF, and the structure is most of four 2×4′s, put together with plenty of screws.  It checks out flat with a 4′ straightedge, so I imagine it will serve the purpose.  Also reading up on the trials and tribulations of building the control surfaces on others’ build logs.

This entry was posted on Tuesday, August 18th, 2009 at 10:18 pm and is filed under Ailerons. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.

Comments are closed.