20th July 2009

Drill, deburr, repeat

Hours: 2.6 | Posted in Ailerons, Flaps

Drilled the flap & aileron gap fairings to the skins and spars, then removed them from the wing.  Deburred all the holes on the components of the flap & aileron brackets, and finished the edges with files and scotchbrite wheel.  With time, luck, and perseverance, I might have all this stuff installed before we leave for AK on the 29th.

Drilling gap fairings to wing Flap & aileron bracket parts

This entry was posted on Monday, July 20th, 2009 at 11:51 pm and is filed under Ailerons, Flaps. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.

Comments are closed.