13th July 2009

Right wing riveting

Hours: 2.1 | Posted in Skin Panels

In a morning and an afternoon session, Allison helped rivet the second pass on the top skin ribs.  After that was done, I slid the J-channels in place and clecoed them to the skins.  I also squeezed the rear spar-skin rivets, so all that remains on the top skins are the skin-spar rivets and the J-channels.

Also picked up lumber and a sheet of 3/4″ MDF to build a box for flap & aileron construction.

Right wing riveting in progress Right wing riveting in progress

This entry was posted on Monday, July 13th, 2009 at 4:43 pm and is filed under Skin Panels. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.

Comments are closed.