4th June 2009

Aileron brackets

Hours: 1.4 | Posted in Ailerons

While waiting for the water level to drop in the fuel tank test, assembled and drilled the four aileron brackets, as well as fabricated the aileron stops out of the supplied angle.  Set the brackets aside for drilling to the wing after we flip it nose-down in the wing cart.  Pondered over the flap brackets, for which there are several parts to fabricate from angle stock, along with much drilling to the wing.  Also pulled out the rest of the aileron pieces and removed the blue plastic.

Aileron brackets

This entry was posted on Thursday, June 4th, 2009 at 6:27 pm and is filed under Ailerons. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.

Comments are closed.