29th March 2009

Leading edge work

Hours: 6.6 | Posted in Skin Panels

Today’s task: prep leading edges for primer.  Disassembled both LE’s, deburred, scuffed rivet lines, and dimpled.  Drilled the splice strip for platenuts, and also finished deburring the landing light internal pieces; all the LE components are ready to be etched & primed.

In between deburring tasks, I also bolted & torqued the tiedown brackets to the spars.  Bellcrack brackets are hung loosely with their bolts, awaiting installation of the bellcranks.

Received the missing F-902-L this week, along with a replacement for the gouged up piece of bar stock.

This entry was posted on Sunday, March 29th, 2009 at 10:58 pm and is filed under Skin Panels. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.

Comments are closed.