22nd March 2009

Landing light install

Hours: 3.2 | Posted in Accessories & Mods

Started work on the Duckworks light kits today, and got all the metal fabrication done, to the point of priming & assembly.  Cut and installed the template on the leading edge assembly (currently clecoed together off the wing), then roughed out the opening with a cutoff wheel in the Dremel.  Finished the opening with vixen file, mill files, Dremel sanding disc, and Scotchbrite wheel in the die grinder.  Cut, drilled and deburred the lamp bracket, drilled the holes in the ribs for the attachment screws/nutplates.  Lookin’ good.

This entry was posted on Sunday, March 22nd, 2009 at 8:35 pm and is filed under Accessories & Mods. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.

Comments are closed.