23rd
July
2012
Hours: 6.0 | Posted in Endgame, Gear & Fairings
Removed the peel ply, reclecoed the pants, and final drilled wheel pant attach holes to #27 for a #6 screw.
Lots of on-off-on-off to get the tire gap on the nosewheel pant right, and to trim the hole in the top so it doesn’t hit the leg when the wheel turns.
![Nosewheel pant trimmed and fit](http://rv9a.pacificrimsound.com/wp-content/uploads/2012/07/20120723_202416-150x150.jpg)
This entry was posted
on Monday, July 23rd, 2012 at 10:18 pm and is filed under Endgame, Gear & Fairings.
You can follow any responses to this entry through the RSS 2.0 feed.
Both comments and pings are currently closed.