26th April 2012

Spraying, part deux

Hours: 1.2 | Posted in Cowling & Baffles

Sprayed two layers of K36 surfacer on the cowls and spinner.  Tomorrow, sanding.  Hopefully my order of more DPLF will show up soon, since I’m out.

The top skin looks decent enough that I’m just going to sand the first layer of DPLF and re-spray with the final coat of DPLF sealer; thinking that this will cause the least headache for any prep work a painter will need to do in the future, while protecting the metal and covering up the ugly factor of the micro filler areas.

This entry was posted on Thursday, April 26th, 2012 at 9:44 pm and is filed under Cowling & Baffles. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.

Comments are closed.