13th July 2011

Odds without ends

Hours: 1.1 | Posted in Electrical, Wing & Tail Joins

From the “I don’t really feel like going out to the shop but I need to do something to keep moving” file…

Removed the -14 adel clamps from the main vertical wiring trunk, and installed -15 clamps, which are large enough to contain the few wires that wouldn’t fit in the smaller ones that had been originally installed.

Terminated the boost pump power & ground into a 2-pin molex connector to mate with the one I had previously installed on the pump leads.  Test fit and tested that the pump powered up.

Wiped off the rest of the fiberglass tips for the empennage, and traced the initial trim lines with a black sharpie.

This entry was posted on Wednesday, July 13th, 2011 at 10:36 pm and is filed under Electrical, Wing & Tail Joins. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.

Comments are closed.