12th April 2011

Oil cooler test

Hours: 1.5 | Posted in Engine

I wanted to get the order put in for all the FWF hoses at once, and to do so, I needed to identify what hoses were needed for the oil cooler hookup.  This, in turn, required test-fitting the aft left portion of the engine baffles.  The good news is that I was able to figure out what hose lengths would work, and I’ve sent that off to the guy who’ll be making the hoses.  I also determined that the hose routing should work with the wire runs and such I’ve already mounted.  I did move one adel clamp to provide some additional clearance at the lower corner of the cooler.

Also received the package from Van’s today with the AeroLED lights — these things are bright!

This entry was posted on Tuesday, April 12th, 2011 at 1:03 pm and is filed under Engine. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.

Comments are closed.