15th March 2011

Panel switches installation

Hours: 1.9 | Posted in Electrical

The panel, having sat for a couple days to let the paint cure, was ready to have some parts loaded.  The paint turned out alright, though there are a couple blemishes I’m not too worried about them.  Took some time tonight to attach the placards, then loaded in the switches, dimmer pots, and annunciator lights, and tightened the nuts down.  To finish it off, I loaded in the CO/SpO2 detector, and the blank panels for the autopilot and 2 1/4″ instrument hole.  The blanks for the second EFIS and the 430 still need to be fabricated, and the radio trays installed, though I need to cut the subpanel hole as well.

Panel looks pretty good!

This entry was posted on Tuesday, March 15th, 2011 at 10:55 pm and is filed under Electrical. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.

Comments are closed.