Joshua's RV-9A Project

More wiring work, running things here and there.  More work on wiring the switch row; almost complete.  Started tying up some bundles.  Temporarily mounted the annunciator lights so they can be wired.  Ran out of 22ga wire.  Soldered the jacks on the Pmag serial wires, drilled and mounted to the subpanel along with a label indicating their purpose.  Tested the P-lead wires, established routing for the wires going to the Pmags, and moved the adel clamps on the cases to the opposite corners, where they will be correctly positioned for clamping the wires.  Made up leads with terminals for grounding the ignitions and secured them to the mounting studs.  I need to order a fistful of 5/16 lockwashers to replace the ones I’ve loosened adjusting stuff on the engine.

This entry was posted on Saturday, March 5th, 2011 at 4:41 pm and is filed under Electrical. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.