Joshua's RV-9A Project

Sprayed another coat of black paint on the backlight switch channels, then carried on running wires.  I’m working left-to-right on the panel switches, and made it through about half of them tonight, including the master and starter…tested both with their switches.  I also discovered that my battery was dead because I left the master on after the last work session.  Sigh…so I busted out the battery charger and hooked it up, left it on to charge for awhile.  I bought the Odyssey charger/maintainer, so I could just leave it on to float charge the battery and keep it topped off.  Ran power and p-lead out to the Pmags, as well, and tested the power-side switchology for the Pmags to make sure it was wired correctly.  Will test the p-leads tomorrow, so that I know they’re right before hooking them up to the ignitions.

This entry was posted on Friday, March 4th, 2011 at 11:10 pm and is filed under Electrical. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.