13th February 2010

Forward fuse sides

Hours: 2.8 | Posted in Forward Fuselage

Finished the gear socket holes in the bottom skin.  Fit and installed the 902 side bulkheads, and fit the gear attach webs that fit over them.  Cut the reinforcing strips that go between the side skin and the gear attach webs and deburred the edges.

Gear socket hole in bottom skin Gear web fit to fuselage side

This entry was posted on Saturday, February 13th, 2010 at 2:53 pm and is filed under Forward Fuselage. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.

Comments are closed.