8th February 2010

Gear leg holes

Hours: 0.3 | Posted in Forward Fuselage

Snowblowing and a batch of last-minute CD’s to copy mean not much time for the project tonight.  I used Allison’s tracings to mark the oval holes in the bottom skin where the gear leg sockets pass through, then roughed out the holes with a unibit and file.  Next time, I’ll take them out to the cut line and smooth them with the scotchbrite wheel.

This entry was posted on Monday, February 8th, 2010 at 9:26 pm and is filed under Forward Fuselage. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.

Comments are closed.