9th January 2010

Tailcone prep & prime

Hours: 4.2 | Posted in Aft Fuselage

Etched and primed the stiffeners and skins of the tailcone, plus some touch-up on bulkheads where primer had been scratched during the fitting process.  Now ready to reassemble and rivet.

Aft tailcone parts primed Priming aft side skin

This entry was posted on Saturday, January 9th, 2010 at 11:53 pm and is filed under Aft Fuselage. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.

Comments are closed.